Arianeplast offers you its range of Pla high perfomance!
A revolution in the world of 3D FDM printing, the PLA Ingeo 3D870 by NatureWorks better known as PLA TOUGH + !
The resin basic from long research and development of NatureWorks is grade Ingeo especially and only designed for 3D printing, combined with technicity and know-how manufacturing Arianeplast, the PLA Ingeo 3D870 is the best for 3D printing, stronger than ABS, specially developed for demanding technical applications!
- a great ease of printing, like any pla
- no warping (even without heatbed)
- an increased print speed of at least 50%
- High print accuracy, even at high speed
- Solidity much greater than the ABS (without any post treatment)
- possibility of an adduce to further increase the resistance of the material
- Impact resistance up to 5x higher than that of ABS (after an advertisement)
- An excellent inter-layer connection that will provide you with solid, resistant, clean prints.
- Density of 1.22 g / cm3
The preconted temperature range is 210 to 230 ° C because the PLA Ingeo 3D870 ArianePlast is more heat-resistant than a standard PLA or HD, more at higher temperature the intercouche connection of this filament is done to perfection, it also has a better aesthetic color of the colors.
Side speed printing, many tests were performed and one of the specificities of the PLA Ingeo 3D870 is at the rendezvous because Impressions at 140mm / s have been made giving impressive quality results even in the finest details!
Grade Ingeo 3D870 from NatureWorks can be annealed offering consequent benefits on shock resistance, heat (85 ° C after anneckoned), torsion, pressure, stretching, ...
However, the annea requires good knowledge about this and reserved for the savvy makers, it is not done anyway, at the risk of distorting printed 3D objects or losing the dimensional stability of the room.
An advobe is in an oven. It must be made sure that she does not bruce and that she never exceeds her crystallization point, ie the moment when she begins to deform.
The optimum temperature will depend on your oven, you will need to do anything but the secret is to heat little but long rather than the opposite.
Here is the table of temperatures recommended according to Anumby.org: (higher temperatures are possible but there is a risk of parts deformation)
This is only indicative and informative!
Heat resistance PLA Ingeo 3d870
Resistance to the impact of PLA Ingeo 3d870
(Beware of the transmitted values are results obtained after tests, values transmitted by ArianePlast as informative indications and can not be held responsible after any rate of the
In conclusion, the PLA Ingeo 3D870 Arianeplast is the most successful and exceptional subject of Pla!
Beginners or confirmed you will find the best of PLA with its complete technical characteristics and its great ease of printing.
Councilextrusion of PLA Ingeo 3d870 Arianeplast:
- Nozzle standard
- temperature of nozzle : 230 °
- Tray: 50 ° With platform preparation, if glass (clean) and fixative type dimafix, etc ...
- Print speed range: 50 to 140mm / s (see an even higher speed according to your impressions and your 3D Printer)
Secure payment
Fast delivery
Satisfied or refunded
